Extraction system (Suction System) for the extraction of scale and dust from brushing, sanding and similar descaling processes, equipped with a spark pre-separator.
Simple and robust extraction system (Suction System) for the extraction of scale and dust from bending, brushing and similar descaling processes.
Wire stress relieving device for optimizing the yield strength ratio (AGT - tensile/ yield ratio elongation), mainly in the production of reinforcement steel / concrete steel, available in pneumatic or hydraulic design.
Infeeding device to support the infeeding process, suitable for wire diameters from 5.5 mm to 10.0 mm, optionally also to be moved out of the wire run with a few hand movements.
Drawing-in device to support the drawing-in process, suitable for wire diameters from 5.5 mm to 16.0 mm, optionally also to be moved out of the wire run by minimal actions, with integrated straightening device for time-efficient drawing-in processes
Collapsible spools with extremely easy to operate locking system, available for cardboard core or without, for example with width adapter, inner gripper or also core protection.
Driven Rotating die holder to hold a drawing die, whose rotation allows both pre-calibration of the wire and precise tolerance and drawing die use in the final drawing stages.
Soap box in standard or customized design, available for dry and wet drawing and corresponding combinations with 1 to 3 chambers, optionally with roller cross, adjustable in capstan direction.
EJP WIRE Technology GmbH
Lohbachstr. 12
D-58239 Schwerte
Tel.: +49 (0) 2304 - 338 96 0
Fax: +49 (0) 2304 - 338 96 10
info@ejpwire.com